We offer FEP granular materials suitable for lining, injection molding and extrusion of thin rods and tubing, based on suitable melt flow range

FEP granular	FEP for lining of pipes, pipe fittings and vessels
	Prime virgin, first class
Appearance	Semitransparent granule, without contaminants of metal or sand particles. Resin pellets having visible black dot < 1 %
Melt Flow Rate (g/10 min C)	0.8 – 2.0
Tensile Strength (>= Mpa)	27.0
Elongation at break (>= %)	320
S S G	2.12 – 2.17
Melting point	265 +/- 10 deg C
Dielectric constant (=< 1MHZ)	2.15
Dielectric loss target (=< 1MHZ)	7.0 x 10-4
Volatile matter (=< %)	0.10
Packing	20 kg fiber drums

FEP granular	FEP for injection molding and extrusion of thick wall tubing.
	Prime virgin, first class
Appearance	Semitransparent granule, without contaminants of metal or sand particles, Resin pellets having visible black dot < 1 %
Melt Flow Rate (g/10 min C)	4.1 – 12.0
Tensile Strength (>= Mpa)	21.0
Elongation at break (>= %)	300
S S G	2.12 – 2.17
Melting point	265 +/- 10 deg C
Dielectric constant (=< 1MHZ)	2.15
Dielectric loss target (=< 1MHZ)	7.0 x 10-4
Volatile matter (=< %)	0.10
Packing	20 kg fiber drums

FEP granular	FEP for high-speed extrusion of thin tubing and insulation of cables.
	Prime virgin, first class
Appearance	Semitransparent granule, without contaminants of metal or sand particles. Resin pellets having visible black dot < 1 %
Melt Flow Rate (g/10 min C)	15.0
Tensile Strength (>= Mpa)	23.0
Elongation at break (>= %)	300
S S G	2.14
Melting point	257 +/- 10 deg C
Dielectric constant (=< 1MHZ)	2.10
Dielectric loss target (=< 1MHZ)	4.0 x 10-4
Volatile matter (=< %)	0.07
Packing	20 kg fiber drums