Foresight Global Logo

UHMWPE



 border= border= border=


OUTSTANDING APPLICATION PROPERTIES



EXCELLENT IMPACT RESISTANCE
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGH WEAR RESISTANCE
HIGH WEATHERING RESISTANCE
HIGH TENACITY AND COMPRESSIVE STRENGTH
FOODSAFE & PHARMA GRADES

DELIVERY PROGRAM, all dimensions in mm
Standard Colors : Natural white, Black, Green, Blue, Red, Yellow

EXTRUDED RODS
Mol. Wt
9.0
15 TO 90 DIA X 2000 LONG
100 TO 300 DIA X 1000 LONG
PRESSED SHEETS
5.0
8 TO 300 THICK X 1000 X 2000
8 TO 300 THICK X 1500 X 3000 / 1300 X 5000 / 2000 X 4500 - SPECIAL PRODUCTION WITH MOQ
SKIVED SHEETS
5.0
1 ,2, 3, 4, 5 THICK X 1000 X 2000
EXTRUDED / PRESSED HOLLOWS
5.0
SPECIAL PRODUCTIONON REQUEST WITH MOQ0
CUSTOM SIZES
5.0 / 9.0
RODS, SHEETS, HOLLOWS AVAILABLE ON REQUEST WITH MOQ
MACHINED PARTS CIRCULAR
9.0
10 TO 300 DIA
MACHINED PARTS SQUARE /RECTANGULAR
5.0
UPTO SIZES 2000 X 4500 OR 1300 X 5000


TECHNICAL DATA SHEET , MIN .MOL. WT5.0 MILLION

PROPERTY

STANDARD

VALUE

Density
ASTM D792
0.93-0.95 g/cm3
Water Absorption
ASTM D570
<_0.01 %
Tensile strength
ASTM D638
≥18N/mm2
Elongation
ASTM D638
≥50 %
Impact strength, Izod,23°C
ASTM D256
.100J/cm
Hardness
ASTM 785
61-65 Shore D
Compressive strength at 1% def.
ASTM D695
70 - 80 kg/cm2
Thermal conductivity
ASTM D2214
0.41W/m. K
Volume resistivity, at 50% RH
ASTM D257
<105Ohm cm
Surface resistivity , at 50% RH
ASTM D257
<105Ohm
Safe Operating temperatures
-
- 80 to +80 deg C
Coefficient of friction, static
ASTM D3028
≥ 0.2
Coefficient of friction, dynamic
ASTM D3028
≥ 0.15
Moisture / solvent absorption
-
Negligible
Combustibility
-
Partly non-combustible
Weather resistance
-
Excellent


TECHNICAL DATA SHEET , MIN .MOL. WT 9.0 MILLION

PROPERTY

STANDARD

VALUE

Suitable for Food Contact
-
Yes
Density
DIN EN ISO 1183
0.93 g/cm3
Flamability
DIN 4102
B2 mm
Flamability
UL 94
HB
Water Absorption Rate
DIN EN ISO62
<0.01 %
Yield Stress / Tensile Strength
DIN EN ISO 527-1
20 N/mm2
Elongation at Break
DIN EN ISO 527-1
>200 %
Tensile Modulus of Elasticity
DIN EN ISO 527-1
680 N/mm2
Notched Impact Strength Charpy
DIN EN ISO179.2
- mJ/mm2
Notched Impact Strength (Double) V Notch
DIN EN ISO 179.2
>130 mJ/mm2
Shore - D Hardness
DIN EN ISO 868/ 15
63
Melting Temperature
DIN EN ISO 3146
135 Deg C
Thermal Conductivity
ISO 8302
0.4 W/m.k
Specific Thermal Capacity
DIN 51005
1.9 J/k.kg.
Coefficient of Linear Thermal Expansion
DIN 53752
150 – 230 1/K.106
Service Temperature Long Term
-
- 250 to 80 Deg C
Service Temperature Short Term
-
130 Deg C
Heat Deflection Temperature
DIN EN ISO 306
VICAT A
Deg C
Heat Deflection Temperature
DIN EN ISO 306
VICAT B
79 Deg C
Dielectric Constant
DIN VDE 0303-4
2.3
Di-electric Dissipation Factor
DIN VDE 0303-4
1 x 1014
Specific Volume Resistivity
DIN VDE 0303-3
>1014 Ohm/scm
Surface Resistivity
DIN VDE 0303-3
>1014 Ohm
Comparative Tracking Index (Test Solution A)
IEC 60112
600 CTI
Di-electric Strength
IEC 60243
45 KV/mm


DISCLAIMER



- THE VALUES GIVEN IN THE DATA SHEET ARE FOR REFERENCE ONLY.
- CUSTOMERS ARE ADVISED TO TEST THE SUITABILITY OF OUR MATERIALS FOR THEIR APPLICATION AS THESE VALUES MAY NOT DIRECTLY HOLD GOOD UNDER ALL COMPLEX / MULTIPLE APPLICATION CONDITIONS.
- OUR COMPANY DOES NOT UNDERTAKE ANY LIABILITY, DIRECT OR INDIRECT, LINKED WITH THE USAGE AND PERFORMANCE OF OUR MATERIALS UNDER APPLICATION CONDITIONS.